摘  要

 

采煤机直接用于煤炭的地下开采,是煤炭生产中最主要的机械设备之一。改革开放以来,我国的采煤机研发有了长足的发展,但在性能和可靠性上与世界先进国家的采煤机相比,还存在一定的差距。为此,开发高产高效矿井综合配套技术是我国煤炭科技发展的主攻方向。为提升产品设计质量,完善快速设计和个性设计手段,采煤机的创新设计尚需要加大研究力度。

MG250/591-WD型电牵引采煤机是在鸡西煤机有限公司多年研制电牵引采煤机成功技术的基础上开发制造成功的。我这次设计的主要任务是对MG250/591-WD型采煤机右截割部摇臂壳体进行加工工艺规程设计。创新之处在于在设计过程中根据具体情况应用了数控编程。

 

关键字: 采煤机    加工工艺规程     数控编程

 

 

Abstract

 

Coal mining machine uses in the coal directly underground mining, is in the coal production one of most main mechanical devices. Since the reform and open policy, the coal mining machine research and development had the considerable development, But compares in the performance and in the reliability with the world advanced countries coal mining machine, also has certain disparity. Therefore, the development high production highly effective mine pit synthesis necessary technology is our country coal science and technology development main attack direction. In order to promote the product design quality, the consummation fast design and the individuality design method, the coal mining machine innovation design still needed to increase the research dynamics.

The MG250/591-WD electricity hauling coal mining machine is develops in the JiXi coal machine limited company many year development electricity hauling coal mining machine success technology foundation makes successfully. The author this design primary mission is carries on the processing technological process design to the MG250/591-WD coal mining machine right cutting department rocking shaft shell. Place of the innovation lay in the design process acts according to the special details to apply the numerical control programming.

 

Key words: Coal mining machine    Processing technological process     Numerical control programming

 

 

目录

摘要  ……………………………………………………………………Ⅰ

Abstract  ………………………………………………………………Ⅱ

第  1  章绪论 ………………………………………………………… 1

第  2  章MG250/591-WD型采煤机概述……………………………… 4

2.1 MG250/591-WD型采煤机简介………………………………… 4

2.2 工作原理……………………………………………………… 4

2.3 采煤机结构组成及其各部分的功用………………………… 5

2.3.1 截割部………………………………………………… 5

2.3.2 牵引部………………………………………………… 6

2.3.3 行走部………………………………………………… 6

2.3.4 液压传动部…………………………………………… 6

2.3.5 冷却喷雾系统………………………………………… 6

2.3.6 电气系统……………………………………………… 6

2.4 主要技术特点………………………………………………… 7

2.5 主要技术参数及配套设备…………………………………… 8

2.5.1 主要技术参数………………………………………… 8

2.5.2 主要配套设备………………………………………… 9

第  3  章 MG250/591-WD型采煤机右摇臂壳体工艺规程设计……  11

3.1 壳体零件的功用和结构特点………………………………… 11

3.1.1 壳体零件的功用……………………………………… 11

3.1.2 壳体零件的结构特点………………………………… 11

3.1.3 矿井用壳体零件的特点……………………………… 11

3.2壳体零件的主要技术要求…………………………………… 12

3.3零件图样分析………………………………………………… 13

3.4 工艺分析……………………………………………………… 14

3.5 加工工艺规程………………………………………………… 14

第  4  章 右摇臂壳体数控加工工艺………………………………… 15

4.1 数控加工工艺的内容………………………………………… 15

4.2 数控加工工艺的特点………………………………………… 15

4.3 加工中心的选择……………………………………………… 15

4.4 数控加工工艺分析与设计…………………………………… 19

4.4.1 零件加工的可行性分析……………………………… 19

4.4.2 零件的工艺性分析…………………………………… 19
4.4.3 走刀路线的选择……………………………………… 20

4.4.4 对刀点与换刀点的确定……………………………… 20

4.4.5 加工余量的确定……………………………………… 21

4.4.6 切削用量的选择……………………………………… 21

4.5 加工中心的工艺及工艺装备………………………………… 22

4.5.1 工艺性分析…………………………………………… 22

4.5.2 工艺过程设计………………………………………… 22

4.5.3 零件的装夹…………………………………………… 23

4.6 加工中心编程的特点………………………………………… 24

4.7 零件主要工序数控程序编制………………………………… 24

第  5  章 工艺过程的技术经济分析………………………………… 28

第  6  章 绿色制造…………………………………………………… 30

第  7  章 专题论文…………………………………………………… 32

结论……………………………………………………………………… 38

致谢……………………………………………………………………… 39

参考文献………………………………………………………………… 40

附录1外文翻译及原文………………………………………………… 42

附录2数控加工程序…………………………………………………… 56

附录3工艺规程………………………………………………………… 77

发表回复

您的电子邮箱地址不会被公开。 必填项已用*标注

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源