本次设计是结合近年来国内外机床行业发展的新趋势,针对柴油机汽缸盖两侧的小孔钻削的组合机床设计.组合机床是由大量的通用部件和少量的专用部件组成的工序集中的高效率机床,它能够对一种(多种)零件进行多刀,多轴,多面,多工位加工,制造的周期短,投资少,经济效益高.
关键词:汽缸盖;毛坯;定位;机床夹具;金属切削;钻头
This design was unified the new tendency of domestic and foreign machine tool’s industry development in the recent years, aimed at the design of assembled machine tool of the two sides’ pore drilling of diesel engine cylinder’s cover. The assembled machine tool is the centralized working procedure and high efficiency machine tool, which is composed by the massive general parts and the few special parts, it can process one kind (or many kinds)of part on the multi-knives, multiple-spindle, multi- surface, multi-locations. Its manufacture cycle is short, the investment is little ,but the economic benefit is high.
Keywords: Cylinder Head;roughCutters;allocation; jig; metal cutting; drills
目 录
摘 要
ABSTRACT
前 言
第一章 零件的分析
1.1零件的功用
1.2零件的工艺分析
1.3 确定毛坯的制造形式,加工余量,工序尺寸及毛坯尺寸
1.3.2精基准的选择
1.3.3粗基准的选择
1.4 工艺路线的拟订及工艺方案的分析
1.4.1工艺路线的拟订
1.4.2 工艺方案的分析,加工设备的选择及刀具、夹具、量具的选用
第二章 指定工序的夹具设计
2.1 问题的提出
2.1.1 夹具定位元件的设计及定位误差的分析计算
2.2夹具设计
2.2.1定位基准的选择
2.2.2切削力与夹紧力的计算
2.3支承部件的设计
2.4夹具设计及操作的简要说明
第三章 组合机床的设计
3.1组合机床的概述
3.2组合机床方案的制定
3.2.1 工艺路线的确立
3.2.2 机床配置型式的选择
3.2.3 定位基准的选择
3.2.4 滑台型式的选择
3.3 确定切削用量及选择刀具
3.3.1 选择切削用量
3.3.2计算切削力、切削扭矩及切削功率
3.3.3 选择刀具结构
3.4 组合机床总体设计—三图一卡
3.4.1 被加工零件工序图
3.4.2 加工示意图
3.4.3 机床尺寸联系总图
3.4.4 机床生产率计算卡
四 组合机床主轴箱设计
4.1主轴箱的概述
4.2主轴箱的设计步骤和内容
4.2.1 绘制主轴箱原始依据图
4.2.2 主轴结构型式的选择和动力计算
4.2.3 主轴箱传动系统的设计与计算
4.2.4主轴箱坐标计算
4.2.5主轴箱总图设计
总 结
参考文献
致 谢