高层建筑外墙清洗机—升降机部分的设计

 

摘  要:高层建筑外墙清洗机是一种投资小,成本低,安全可靠,工作效率高的机器。该机器分为两部分,一部分是在大楼顶上的清洗机升降机,清洗机升降机通过钢丝绳,吊钩带动另一部分,即清洗机附在高层建筑外墙壁上进行清洗工作。高层建筑外墙清洗机工作时,升降机的双速电机启动,通过钢绳带动机架迅速上升,上升到预定位置,双速电机停止并制动,调整好清洗机的位置后,解除制动,双速电机反向启动,机架则缓慢向下移动,与此同时,机架顶部的喷淋水嘴喷水,各导轨上的刷具在各电机的带动下沿各自的导轨往复移动的同时作旋转运动,洗清外墙上的污渍,使外墙干净洁白美观。

 

关键词:  高层建筑外墙清洗机;  清洗机升降机;  清洗机

 


The external walls of high-rise building washing machine —part of the design lifts

 

Abstract: The external walls of high-rise building cleaning machine is a small investment, low cost, safe, reliable, efficient machines. The machine is divided into two parts, is part of the building on top of the washing machine lifts, washing machines through the lift rope, hook driven another part, that is, washing machine attached to the external walls of high-rise building cleaning work. The external walls of high-rise building cleaning machines work, lift the two-speed motor launch, led by wire rope rack rising rapidly, up to the scheduled location, two-speed motor and braking to stop, adjust the location of washing machines, lifting brake, Reverse two-speed motor launch, the rack is slowly moving down at the same time, Shuizui rack at the top of the water spray, brush with the rails in the motor driven along the rails of their respective reciprocating At the same time moving to rotate, cleared on the external walls of the stains, clean the external walls of white beauty.

Key words: the external walls of high-rise building cleaning machine;   washing machine lifts;   washing machine.

 

目录

摘  要………………………………………………………………………… 1

Abstract…………………………………………………………………………2

第一章  序言

  • 1.1清洗建筑表面的意义…………………………………………………3
  • 1.2. 高层建筑外墙清洗方法介绍…………………………………………3
  • 1.3. 高层外墙清洗机简介…………………………………………………5

第二章  整机的工作原理和主要参数

  • 2.1工作原理………………………………………………………………7
  • 2.2 主要参数………………………………………………………………7

第三章  清洗机升降机的设计

  • 3.1 钢丝绳的选择………………………………………………………8
  • 3.2 卷筒的设计计算………………………………………………………8
  • 3.3 减速器的选择…………………………………………………………11
  • 3.4 滑轮的设计……………………………………………………………11
  • 3.5 吊钩的设计……………………………………………………………12
  • 3.6 制动器的选择…………………………………………………………12
  • 3.7 双速电机的选择………………………………………………………12
  • 3.8 联轴器的选择…………………………………………………………13
  • 3.9 脚轮的选择……………………………………………………………13
  • 3.10传动零件的选择及其校核…………………………………………14
  • 3.11杆臂的设计及其强度校核…………………………………………15
  • 3.12 定位支撑杆的设计…………………………………………………17
  • 3.13 控制电路的设计……………………………………………………18

设计总结及展望………………………………………………………………20

参考文献………………………………………………………………………21

翻译部分………………………………………………………………………22

发表回复

您的电子邮箱地址不会被公开。 必填项已用*标注

本站所有资源版权均属于原作者所有,这里所提供资源均只能用于参考学习用,请勿直接商用。若由于商用引起版权纠纷,一切责任均由使用者承担。更多说明请参考 VIP介绍。

最常见的情况是下载不完整: 可对比下载完压缩包的与网盘上的容量,若小于网盘提示的容量则是这个原因。这是浏览器下载的bug,建议用百度网盘软件或迅雷下载。 若排除这种情况,可在对应资源底部留言,或联络我们。

对于会员专享、整站源码、程序插件、网站模板、网页模版等类型的素材,文章内用于介绍的图片通常并不包含在对应可供下载素材包内。这些相关商业图片需另外购买,且本站不负责(也没有办法)找到出处。 同样地一些字体文件也是这种情况,但部分素材会在素材包内有一份字体下载链接清单。

如果您已经成功付款但是网站没有弹出成功提示,请联系站长提供付款信息为您处理

源码素材属于虚拟商品,具有可复制性,可传播性,一旦授予,不接受任何形式的退款、换货要求。请您在购买获取之前确认好 是您所需要的资源